This Saturday we installed what is to be the first of several radio antennas on the roof of our house. Scott climbed to the top of the roof and mounted the mast and antenna while I ran around on the ground fetching tools and lending moral support. After it was installed we went into attic to retrieve and feed the wiring from the antenna on the roof down the inside of the wall of his office and then out at the base of the wall by an electrical outlet. Hot doesn’t even begin to describe the temperature in the attic!
The hole saw’s that we own have been used for years and are quite crappy so after fighting with the hole drilling for a while Scott decided to bring out the big guns. I retrieved the new sledge hammer and it did the trick. Now the scanner is working great with the new antenna installed. It does look a bit sci-fi though. This antenna is called a Ham Discone Radio antenna and Scott is going to be using it with his Radio Shack Pro-2052 (dual truncking) scanner until he get a 2-meter ham radio.
Can’t wait to see what configuration the next one has. Hopefully it will be a little cooler the next time we try this. The heat was just incredible today and Scott probably lost 10 pounds just trying to feed the wires through the attic into his office. This antenna can now be seen quite a ways off, maybe we can use it some day to put Christmas lights up with a star on top, you will be able to see it from Birmingham.
Wow, are you sure you are from this planet??? LOL
[...] Installing a Ham Discone Radio Antenna on the Roof Scott Fillmer Posted by root 1 day 21 minutes ago (http://www.scottfillmer.com) Scott climbed to the top of the roof and mounted the mast and antenna while i ran around on the 1 comment take a look at some of the responses we 39 ve had to this article copyright 2007 scott fillmer powered by wordpress Discuss | Bury | News | installing a ham discone radio antenna on the roof scott fillmer [...]